{"id":9149,"date":"2026-09-02T17:32:56","date_gmt":"2026-09-02T09:32:56","guid":{"rendered":"https:\/\/www.yantaisensor.com\/?p=9149"},"modified":"2026-09-02T17:34:43","modified_gmt":"2026-09-02T09:34:43","slug":"how-to-increase-solar-output","status":"publish","type":"post","link":"https:\/\/www.yantaisensor.com\/fr\/blog\/how-to-increase-solar-output","title":{"rendered":"Comment augmenter la production d\u2019une centrale solaire \u00e0 l\u2019aide de capteurs environnementaux ?"},"content":{"rendered":"

Introduction<\/h2>\n\n\n\n

A solar farm can have plenty of sunlight and still produce less electricity than expected. So where is the lost output going? A change in l'irradiance solaire<\/mark><\/a>, higher PV module temperature, accumulated dust, or shifting wind conditions can all affect plant performance. However, when generation falls, it is not always easy to tell whether the change is simply caused by weather or indicates a performance issue that requires attention.<\/p>\n\n\n\n

This is why reliable environmental data matters when you want to Increase Solar Output. By continuously monitoring solar irradiance, module temperature, wind, humidity, soiling, and other site conditions, operators can build a clearer picture of how the PV system is performing under actual operating conditions. When these measurements are compared with real-time power generation, they provide a useful reference for identifying unusual output, evaluating performance changes, and deciding when maintenance or further inspection is necessary.<\/p>\n\n\n\n

This guide explores how environmental sensors for solar farms can support higher and more consistent energy production, including the role of irradiance monitoring, module temperature measurement, wind and weather monitoring, and soiling assessment. It also explains how environmental data can be integrated with solar farm performance monitoring and existing SCADA systems, how sensor measurements can support performance analysis and maintenance decisions, and how to select a practical sensor configuration based on plant size, site conditions, tracking system, monitoring requirements, and existing infrastructure.<\/p>\n\n\n\n

\n
\"solutions<\/figure>\n\n\n\n
\"solutions<\/figure>\n<\/figure>\n\n\n\n

What Affects Solar Farm Output?<\/h2>\n\n\n\n

Solar farm output is first determined by the amount of solar energy available at the site. Irradiance<\/mark> is the most direct environmental input, while module temperature, clouds, wind, and soiling can change how the PV array performs under actual conditions. For example, higher module temperatures generally reduce PV power output, while dust on the module surface can limit the sunlight reaching the cells. These conditions vary throughout the day and across seasons, so lower generation does not always indicate an equipment problem. For a more detailed explanation of common efficiency losses, see 5 principaux facteurs r\u00e9duisant l\u2019efficacit\u00e9 des panneaux solaires<\/mark><\/a>.<\/p>\n\n\n\n

System design and equipment performance then determine how effectively the available solar resource is converted into electricity. Module orientation, array layout, mounting structures, inverter selection, MPPT operation, cable design, shading, mismatch, and equipment condition can all affect the final energy yield. A well-designed system reduces avoidable electrical and conversion losses, while suitable tracking and equipment configuration can help the PV array capture more available solar energy under the right site conditions.<\/p>\n\n\n\n

The final part is operation and maintenance. Regular cleaning, inspection, fault detection, and performance monitoring help prevent small issues from developing into prolonged energy losses. However, operators need reliable reference data to know whether a change in output is caused by weather or a potential system issue. Comparing actual generation with irradiance, module temperature, wind, and other environmental measurements provides a clearer basis for solar farm performance monitoring and helps identify where practical improvements can be made. This is where environmental sensors become valuable for efforts to Increase Solar Output.<\/p>\n\n\n\n

\n
\"solutions<\/figure>\n\n\n\n
\"station<\/figure>\n\n\n\n
\"capteur<\/figure>\n<\/figure>\n\n\n\n

How Environmental Monitoring Helps Increase Solar Output?<\/h2>\n\n\n\n

Environmental sensors help solar farm operators make better decisions by showing the conditions under which the PV system is generating electricity. Instead of looking at power output alone, operators can use irradiance, module temperature, wind, humidity, and soiling data to understand whether the plant is performing as expected. This makes it easier to separate normal weather-related changes from performance issues that may require inspection or maintenance.<\/p>\n\n\n\n

The value comes from connecting environmental measurements with actual generation data. Irradiance provides a reference for available solar energy, module temperature helps explain thermal effects on PV performance, while wind and other weather measurements add operating context. Soiling data can also support cleaning decisions. When these measurements are compared with SCADA or inverter data, operators can identify performance deviations earlier, focus maintenance where it is needed, and use more reliable information to Increase Solar Output over the operating life of the solar farm.<\/p>\n\n\n\n

Establish an Accurate Solar Resource Baseline<\/h3>\n\n\n\n

Solar irradiance is the first measurement to look at when assessing solar farm output. It tells operators how much solar energy is actually reaching the PV array at a given time. When irradiance and power output change together, the variation may simply reflect changing sunlight. When the available solar resource stays relatively stable but generation falls, however, there is a reason to look more closely at the PV system. Reliable irradiance data therefore gives operators a practical reference for solar farm performance monitoring and helps them judge whether the plant is producing as expected.<\/p>\n\n\n\n

The right measurement equipment depends on how the solar resource needs to be evaluated. For routine radiation monitoring, the RYQ-3 Solar Radiation Total Radiation Meter<\/mark><\/a>, TBQ-2C Compteur de rayonnement total<\/mark><\/a>, et SR30 Solar Radiation Sensor <\/mark><\/a>provide options for measuring solar radiation at the site. Where the application requires the measurement system to follow the sun automatically, the SAUT Automatic Tracking Solar Radiation Measurement System<\/mark><\/a> offers a different approach. By combining these measurements with power-generation data, operators can build a more reliable picture of plant performance and identify changes that may otherwise be difficult to explain.<\/p>\n\n\n\n

Monitor PV Module Temperature<\/h3>\n\n\n\n

PV modules do not operate at the same temperature as the surrounding air. Under strong sunlight, the module surface can become significantly hotter than the ambient environment, and higher operating temperatures generally reduce the electrical output of PV modules. Monitoring module temperature alongside solar irradiance gives operators a better way to understand changes in generation, especially when two periods have similar sunlight but different thermal conditions.<\/p>\n\n\n\n

For this reason, temperature monitoring is often included in a PV weather monitoring system rather than treated as a separate measurement. The XF500S-CWB PV Compact Weather Sensor<\/mark><\/a> provides temperature and other environmental measurements in a compact setup for PV sites. When its temperature data is compared with irradiance and actual power generation, operators can better assess normal thermal performance, identify unusual changes, and build a more useful basis for long-term solar farm performance monitoring.<\/p>\n\n\n\n

\n
\"Syst\u00e8me<\/figure>\n\n\n\n
\"Station<\/figure>\n\n\n\n
\"station<\/figure>\n<\/figure>\n\n\n\n

Track Wind and Ambient Conditions<\/h3>\n\n\n\n

Wind speed, wind direction, ambient temperature, and humidity provide important context for understanding PV operating conditions. Wind influences how quickly modules dissipate heat, while ambient temperature helps explain changes in module temperature. Humidity can also help characterize local weather conditions, particularly at sites with significant seasonal or daily variations. By monitoring these conditions alongside irradiance and power output, operators can better distinguish normal weather-related changes from potential performance issues.<\/p>\n\n\n\n

A Solar Meteorological Station<\/mark><\/a> can combine multiple environmental measurements into a single monitoring setup, making it easier to collect consistent data across the solar farm. For projects that mainly require outdoor solar radiation measurements, the RYZW Solar Radiation Outdoor Sensor<\/mark><\/a> provides a more focused option. The appropriate configuration should be based on the site’s climate, monitoring objectives, sensor placement, and compatibility with the existing data acquisition or SCADA system.<\/p>\n\n\n\n

Monitor Soiling and Cleaning Conditions<\/h3>\n\n\n\n

Soiling can gradually reduce the amount of sunlight reaching PV modules, but cleaning on a fixed schedule may not always be the most efficient approach. Dust accumulation, rainfall, humidity, and changes in PV performance can vary significantly by site and season. Monitoring these conditions gives operators a better basis for deciding when cleaning is necessary and helps connect maintenance actions with actual changes in solar farm output.<\/p>\n\n\n\n

For solar farms where dust accumulation is a significant concern, the DustCom PV Dust Index Monitoring System<\/a><\/mark> et DustLV PV Module Soiling Status Monitor <\/mark><\/a>can be used for dedicated soiling assessment. Their measurements can be evaluated together with solar irradiance and power-generation data to determine whether a growing performance gap is potentially related to module surface contamination. This provides a more practical basis for solar soiling monitoring, cleaning decisions, and ongoing PV performance monitoring.<\/p>\n\n\n\n

\n
\"Station<\/figure>\n\n\n\n
\"XF500S-CWB-capteur-m\u00e9t\u00e9o-compact-pour-solaire\"<\/figure>\n\n\n\n
\"Station<\/figure>\n<\/figure>\n\n\n\n

Compare Environmental Conditions with Actual Power<\/h3>\n\n\n\n

Environmental data becomes most useful when it is compared with the electricity actually produced by the PV system. A reduction in output during low irradiance may simply reflect changing weather conditions, while unusually low generation under similar irradiance and temperature conditions may indicate a system issue. This comparison helps operators determine whether further investigation is needed instead of treating every output fluctuation as an equipment fault.<\/p>\n\n\n\n

By combining solar irradiance monitoring, module temperature, weather measurements, and SCADA or inverter data, operators can build a clearer picture of solar farm performance under real operating conditions. When a performance deviation is identified, the data can help narrow the investigation toward areas such as inverters, strings, modules, shading, or soiling. This makes environmental monitoring a practical part of PV performance monitoring and helps operators make more informed decisions to Increase Solar Output.<\/p>\n\n\n\n

\n
\"station<\/figure>\n\n\n\n
\"Station<\/figure>\n\n\n\n
\"station<\/figure>\n<\/figure>\n\n\n\n

How to Select Environmental Sensors for a Solar Farm?<\/h2>\n\n\n\n

Not every solar farm needs the same environmental sensors. The right combination depends on the plant size, monitoring requirements, tracker configuration, and local climate. Start with the measurements needed for PV performance monitoring, then add sensors based on specific site conditions.<\/p>\n\n\n\n

Select Sensors Based on Monitoring Requirements<\/h3>\n\n\n\n

For basic solar farm performance monitoring, solar irradiance, module temperature, and ambient temperature are usually the starting point. Projects with stronger weather or maintenance concerns can add wind, humidity, rainfall, or soiling monitoring.<\/p>\n\n\n\n

Monitoring Requirement<\/td>Recommended Sensors<\/td><\/tr>
Basic PV monitoring<\/td>Irradiance + module temperature + ambient temperature<\/td><\/tr>
Surveillance m\u00e9t\u00e9orologique<\/td>Core sensors + wind + humidity<\/td><\/tr>
Dust-prone sites<\/td>Core sensors + soiling sensor<\/td><\/tr>
Rainfall monitoring<\/td>Core sensors + rain sensor<\/td><\/tr>
Detailed radiation measurement<\/td>Pyranometer or tracking radiation system<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

For radiation measurement, RYQ-3 Solar Radiation Total Radiation Meter, TBQ-2C Total Radiation Meter, SR30 Solar Radiation Sensor, and the SAUT Automatic Tracking Solar Radiation Measurement System can be selected according to project requirements. For soiling monitoring, DustCom PV Dust Index Monitoring System and DustLV PV Module Soiling Status Monitor are available for dedicated assessment.<\/p>\n\n\n\n

Match Sensors to Site and Monitoring System<\/h3>\n\n\n\n

Sensor selection should also consider the actual installation environment and existing monitoring system. Fixed-tilt and tracking PV systems may require different installation arrangements, while dusty, windy, humid, or high-rainfall sites may need additional environmental measurements. Sensors should be installed in representative locations and avoid unnecessary shading or local interference.<\/p>\n\n\n\n

The selected sensors should also be compatible with the site’s data logger and SCADA system, including communication interfaces and power requirements. The required sensor combination depends on plant size, monitoring requirements, tracker configuration, and local climate. A practical PV weather monitoring system should collect the data needed for performance analysis without unnecessary equipment.<\/p>\n\n\n\n

\n
\"Capteur<\/figure>\n\n\n\n
\"Comment<\/figure>\n\n\n\n
\"capteur<\/figure>\n<\/figure>\n\n\n\n

How Environmental Sensors Support Higher Solar Farm Output?<\/h2>\n\n\n\n

Environmental sensors provide the operating data needed to understand why solar farm output changes. Sensors measure conditions such as solar irradiance, module temperature, wind, humidity, rainfall, and soiling, while a data logger collects and stores the measurements. This creates a continuous record of the environmental conditions affecting the PV system rather than relying on power output alone.<\/p>\n\n\n\n

The collected data can then be integrated with SCADA, inverter, and power-generation data. Comparing environmental conditions with actual generation helps operators identify when a change in output is simply caused by lower sunlight or unfavorable weather and when it may indicate a potential performance problem. This provides a more reliable basis for investigating issues such as excessive module temperature, soiling, shading, or abnormal equipment behavior.<\/p>\n\n\n\n

The final step is turning these findings into maintenance and operating decisions. Operators can use environmental data to prioritize cleaning when soiling becomes significant, investigate abnormal output when environmental conditions are stable, and evaluate performance changes over time. Environmental sensors do not directly increase electricity generation; they provide the data needed to identify avoidable losses and make better decisions that can support higher and more consistent solar farm output.<\/p>\n\n\n\n

\n
\"Solutions<\/figure>\n\n\n\n
\"Industrie<\/figure>\n<\/figure>\n\n\n\n

Environmental Sensor Configuration for Different Solar Farms<\/h2>\n\n\n\n

Environmental sensor configuration should match the solar farm\u2019s scale, site conditions, and monitoring goals. Utility-scale plants typically require reliable irradiance and module temperature data together with ambient weather monitoring and SCADA integration, while high-dust sites may add soiling monitoring to support cleaning decisions. Tracking systems should prioritize POA irradiance and wind conditions, whereas hot or humid sites may require closer monitoring of temperature, humidity, rainfall, and wind. The final configuration should also consider sensor placement, data logger and communication compatibility, and whether multiple measurement points are needed to represent conditions across the PV array.<\/p>\n\n\n\n

Solar Farm Type<\/td>Core Monitoring<\/td>Recommended Sensors<\/td><\/tr>
Utility-Scale Solar Farm<\/td>Solar resource, module performance, weather<\/td>Irradiance sensor, module temperature sensor, ambient temperature & humidity sensor, wind speed\/direction sensor<\/td><\/tr>
High-Dust Solar Farm<\/td>Irradiance, soiling, cleaning conditions<\/td>Irradiance sensor, module temperature sensor, soiling monitoring system<\/td><\/tr>
Solar Farm with Tracking System<\/td>POA irradiance, weather, tracker operating conditions<\/td>POA irradiance sensor, module temperature sensor, wind sensor<\/td><\/tr>
Hot or Humid Climate<\/td>Thermal conditions, humidity, rainfall, wind<\/td>Module temperature sensor, ambient temperature & humidity sensor, irradiance sensor, wind sensor, rainfall sensor<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Consid\u00e9rations relatives \u00e0 l'installation et \u00e0 la maintenance<\/h2>\n\n\n\n

Correct installation is essential for reliable environmental data. Irradiance sensors should be installed with the same tilt and orientation as the monitored PV array and positioned where nearby structures, equipment, or vegetation will not cause shading. Module temperature sensors should be firmly attached to the rear surface of representative modules with good thermal contact, avoiding locations affected by junction boxes, mounting rails, or unusual heat sources. Cable routing should also reduce unnecessary electrical interference and mechanical stress, particularly in large outdoor PV sites.<\/p>\n\n\n\n

Regular maintenance keeps measurement quality stable over the operating life of the solar farm. Irradiance sensor surfaces should be inspected and cleaned regularly because dust, bird droppings, or water deposits can bias radiation measurements, while temperature and weather sensors should be checked for physical damage, loose connections, and environmental exposure. Calibration should follow the sensor manufacturer’s requirements and the project’s monitoring standard, with periodic verification against a suitable reference instrument where required. Accurate sensors are essential because poor environmental data can lead to incorrect performance assessments and maintenance decisions.<\/p>\n\n\n\n

\n
\"Projet<\/figure>\n\n\n\n
\"Projet<\/figure>\n\n\n\n
\"Projet<\/figure>\n<\/figure>\n\n\n\n

Conclusion<\/h2>\n\n\n\n

Environmental sensors do not generate additional electricity themselves. Their value is in providing reliable site data that helps solar farm operators understand actual operating conditions and determine whether changes in power output are related to irradiance, temperature, weather, soiling, or other site conditions. By combining environmental measurements with actual generation data, operators can establish a clearer performance baseline, identify unusual changes, and make better decisions about inspection, cleaning, maintenance, and system operation.<\/p>\n\n\n\n

In practice, the approach is Measure \u2192 Monitor \u2192 Compare \u2192 Diagnose \u2192 Act. The right sensor configuration depends on the solar farm\u2019s size, climate, tracking system, and monitoring requirements, with measurements integrated into the existing data acquisition or SCADA system where required. If you are looking to Increase Solar Output through better environmental monitoring, contacter notre \u00e9quipe <\/mark><\/a>to discuss your PV project and find a monitoring configuration suited to its actual operating conditions.<\/p>\n\n\n